Diy

The size of male dignity worried representatives of the strongest sex since ancient times.Confirmation of this is an artificial member found, which, according to historians, is at least 28,000 years old.It was discovered during archaeological excavations in Germany - a country considered a pioneer and a leader in the field of porn industry.

Today to change the size of the penis is possible in various methods - from the use of special medicines, the use of ointments and creams, performing stretch massage, to surgical surgery.However, the throats for the genitalia, which can be purchased as in toys for intimacy and make it with your own hands, become popular.

Is it possible to make a member of the member yourself?

The Internet is full of requirements "How to make an artificial cock with your hands".The added interest is simply explained: the models presented in stores are of high quality and expensive, and those with a low price do not vary in high quality.Wanting to try a sex toy, a dilemma arises: is it necessary to pay for the goods if there is no confidence in its further use?

After all, it may turn out that the girl will not approve the presence of the nose or it will cause discomfort, irritation or her pain (the latter is not excluded for men).If you choose a more affordable option, there is a risk of irritation due to a potential allergic reaction to the toy or damage to the genitals due to broken or exfoliated nasal parts.

It is also possible when you want to try "here and now", but there is no time to wait for an order from the internet, and there is no way to visit the nearest sex shop.In such situations, the question of how to make a dildo or a member of the home is quite important.

If you consider the product, it becomes clear that it is quite difficult to build it, but not impossible.The main thing is to have a desire and a small supply of time, as well as buy the necessary materials.It is on the latter that the final quality of the resulting object will depend.The advantage of a home -made member is that its shape and size will be limited exclusively by the author's imagination.

The choice of suitable material

For gorges and artificial members produced in industrial conditions, use:

• Cybercro is a material almost similar to a person's true skin.It is soft, delicate, practically indispensable from living flesh, because when touches the body, it quickly takes its temperature and holds it throughout the whole time to stay in the organ.The disadvantage of the material is very sensitive to damage, so it requires careful treatment, washing in warm soap water, storage in a special case.
• Polyvinyl chloride is a material that is most popular for the production of dildo and sex toys.Its advantages: the ability to quickly get the shape of the human body, strength and combination with lubricants.It is washed from PVC with soft cleaners: soap, shower gel or intimate hygiene, requires no special storage conditions.Application is possible with any frequency and intensity.
• Silicone is a medical material used for the production of intimate goods in 90% of cases.It is soft, flexible and quite elastic.It is able to quickly take the shape of the body, and after the "work" to return to its original state.Advantage: Hipoallergenicity that allows the functioning of all toys of any intensity.Store the slices from the silicone to a dark place, because under the influence of ultraviolet rays, it is destroyed.Disadvantage - games with it require processing lubrication, and exclusively on water basis.
• The tire is a specialized type of material with increased thermoplastic properties and comfortable for touch.Suitable for creating products to be given and maintained.The softness of the material allows them to make them comfortable for both partners, and elasticity - to receive the necessary parameters (length, thickness, ribs, acne, etc.).The gorges on a rubber member do not rub and cause no allergic reactions.For care, non -graffiti cleaners or special cleaners for intimate toys are used.
• Plastic is a dense material to which special mixes are added for more tenderness and elasticity.It is used for the production of special shapes.

Choosing the material is the most important phase in the production of dildo with your hands, because the final version of the product and its safety for the health of both partners depend on it.Therefore, it is extremely undesirable to save in this case.

Types of materials

Before making phallus at home, you need to clarify which of these materials are available to the manufacturer.Some of them are available for free sale in construction stores, others when ordering online.

So for the production of a home -made gravity, they are appropriate:

• the measure of alginate formation;
• The measure of silicon formation;
• Mass of polyurethane bending.

Maybe other options will be offered in the store, but before you adopt them, you need to find out if the material causes allergic reactions and how safe it is for the body.

Stages of work

How to make a dildo at home?Will be required:

• Transparent flexible plastic;
• adhesive tape (adhesive tape);
• selected material;
• Food film.

A square or rectangle is cut from the plastic sheet - depending on the size the product is planned.The length of the leaf is arranged at will - the more centimeters one wants to add to himself, the longer he is.The width of the leaf depends on the existing penis parameters: in an elevated state, it should easily enter and have free space.To make a home -made member fit in size, it must be:

• Measure it with a centimeter ribbon;
• Add the right amount of centimeters to the results;
• Cut the desired width.

Error: wrap the plastic sheet around the penis and cut "with eyes" - such a shrine made of yourself will be either small or too large.

When finished with dimensions and cuttings, the sheet is turned with a tube, the node of the edges is tightly fixed with the tape.A circle is cut from the plastic, which closes one of the holes and is also tightly wrapped in tape.The task is to make the tube completely tight.

The second stage of the process "How to do a Dildo" is pouring.For this, an elevated penis is wrapped tightly in the captured film in order to exclude the contact of the mass with the body.If the task is to make a smooth nozzle, you should wrap it carefully, excluding all possible irregularities, because the inner softness of the next nose will depend on it.

Next, the formation mass is poured into the prepared tube and the penis sits there.The solidification process on average lasts 15 minutes, after which the structure is removed from the penis.Now you can carefully remove the tape and release the product from the plastic frame - a fake made of home is ready for use.

If the boy wants to give an anatomical shape to the toy, this can be done using a knife and abrasive materials.They are easy to make different ledgers, ribs, antennas and other "chips" of the nose.

THREATS

Before making a member with your hands from makeshift materials, you should consider serious healthy health risks in home -made toys:

• Seals, sharp or poorly processed edges, corners, extensions and other defects in a toy made by home are able to provoke damage to the genitals of both partners;
• Incorrectly calculated size threatens the loss of nasal in the intimacy process;a more serious option - can be fastened into a woman's body;
• If the calculations are performed in a state of incomplete lifting or it lost at the time of hardening of the mass, there is a risk that it will not work to remove the nose without medical care;
• Violation of tightness when wrapping a member with a film can cause measures in the urethra, which will provoke an inflammatory process or blockage of the urethra;
• Keeping a member in a state of full uplifting for 15 minutes is a difficult task for the solution of which men take medication with phosphodesterase inhibitors with serious side effects for internal organs.

By evaluating and weighing all possible risks, they are suitable for independent production of dildo and throat responsibly and carefully, and all stages are carried out with care and accuracy.

What to do an artificial fagon from

It is easier to make a falsificator directly at home, ie.artificial member.Such toys are preferable to ladies, and if the girl wants, she can be left in free possession.For the production of dumplings, they are appropriate:

Gypsum

It is freely sold in a construction supermarket, pharmacy or children's toy store.Once you have prepared the mass (the rules for working with the gypsum are described in the instructions embedded in the package), a member of the desired size is paved, allowed to dry completely.Once it is processed with sandpaper to eliminate all bumps.Before the love games, a condom is put on the fake.

Using a plastic mixture of gypsum is also possible for the production of noses: for this, a fully elevated and wrapped member in a film is covered with a gypsum mixture and let it be strengthened.However, such a toy will be very rigid, and this property causes discomfort, pain, annoyance.Its second disadvantage is fragility.

Silicone

Another option for filling it is in shape from the previous vibrator.That is to say, if the toy is already purchased (or the packaging from it has randomly received from friends), silicone mass can be poured into a plastic form, previously lubricated with vegetable oil for free extraction at the end of the work, and after stabbing, glue half with super glue.

The glue is capable of provoking stronger allergies, so games with such artificial member are recommended only with rubber product no.2.

Wax

This material is available in 90% of cases and anywhere, while it has advantages:

• It easily takes the desired shape;
• has a characteristic aroma;
• In the absence of allergies to beekeeping, it is permissible to introduce a woman to the body without a condom (enough to treat her fat).

The wax candles are heated, it is given the necessary dimensions of length and width, if desired, additional stimulating harness, rivets, ribs, etc.

Plastic

This product for children's creativity can be used in the same way as wax, but it is worth considering that it is more plastic, and therefore, it can easily lose its shape in the midst of sexual contact.A simple pencil is capable of making a more durable toy, located inside a blurred artificial member, or preliminary freezing of the fallus.

Improvised tools

You can make a throat for a penis yourself, but this process is not fast.If the desire of the experiments was suddenly raised, and there are no special toys, you can use makeshift tools.How can you replace a member?

• Vegetables and fruits.In almost every refrigerator, there are nature gifts that have the form of a phallic symbol.An ideal and affordable option - cucumbers and bananas, which in a cool form will bring their shirt to intimate games.
• Mobile phones.We are talking about small patterns that can be vibrated.
• Electric razor.A cut block has previously been removed from it.

The alternative will serve as a comb with a long and wide pen, curly curls and other things of a phallic shape without sharp corners and extension.The main condition for their application: Rinse in the water and place a condom on them.

Bed games with nose, artificial members and lubricants have been called to make diversity and sharpness in the couple's intimate daily life.However, before replacing a member with an artificial copy, it is worth coordinating this issue with a lover, otherwise a romantic evening may end with sadness: a serious quarrel or a painful break.